We've stumbled on this article relating to Simple ways to Install a Shower Cubicle on Your Own down the page on the net and decided it made sense to share it with you on my blog.
An effective shower setup calls for careful preparation and also a lot of work. Most of the times, you will need to do 3 types of tasks: framing wall surfaces, installing the plumbing, and also completing walls.
Different Types of Shower Units
A Lot Of Typical Errors
Prep work.
To start with, you must choose the kind of shower that you wish to set up. It is necessary to establish whether the chosen shower can handling certain systems and can control a safe degree of water through the central heating boiler. Many shower devices nowadays are designed to be versatile to various water stress (such as saved warm water and cool mains).
It is additionally essential to consider the water pressure as well as the planning of the piping as well as drainage for the shower.
Approach.
Depending upon the type of shower you want to set up, the shower head should either be fitted in order to avoid its contact with the water in the bath listed below or the base tray, or it must have a check valve.
Prior to starting, it is a good idea to note the placements of the shower head and control, and also to intend the pipe-work involved. Furthermore, the drainage system to remove the drainage will certainly need to be intended. Both settings of the cable course and the shower switch will certainly also need to be taken into consideration if a rapid or electrical shower unit is being mounted.
Utilize the direction overview supplied with the shower system to fit the shower control.Before suitable the pipelines that will provide the water to the shower system, it is essential to cut off the supply of water. In order to secure the pipelines, they should be given a water-proof covering as well as additionally fitted with isolating valves. The pipes can then be hidden into the wall surface as well as glued over to neaten the overall look.
Fit the base tray, shower head, and fittings.
Attach the major shower control to the pipelines that will certainly be supplying the water (This might require a female screw thread adapter).
Reconnect the water supply as well as test the pipes for any kind of leaks, as some might require tightening.
If you are setting up an electric shower, bear in mind to switch off the electrical power supply before making any type of electrical connections. As soon as these connections have been made (there ought to be assistance within the instruction manual), the power supply can be switched back on.
Readjusting Water Pressure to Fit Your Shower.
The cold water storage tank can be lifted to a greater height (sometimes as little as 150mm (6inches)) by installation a solid wood support below it - perhaps composed of struts as well as blockboards. If you pick this option, the main as well as circulation pipelines will certainly additionally have to be raised to fulfill the brand-new height of the reservoir.
Additionally, a booster pump (a single pump or a dual/twin pump) can be fitted. Whichever type is selected, it needs to be linked right into the power supply in order to run.
Piping and Drain.
It is best to make use of 15mm diameter supply pipes, as well as make the runs to the shower as brief and also straight as feasible so as to maintain optimal stress and also reduce warmth loss. In addition, by reducing making use of elbow joints for pipe corners, you can reduce the resistance in the flow of the water system. You can attain this by flexing the pipelines rather.
How Do You Install a Shower? Follow This Guide
Installing a Shower at a Glance
Tools & Materials: Level, electric drill, caulk, hole saw, cedar shims, shower unit Step 1: Drill pilot holes Step 2: Prep fixture holes Step 3: Move unit into place Step 4: Caulk corners and base Step 5: Attach door Step 6: Install shower pan Whenever plumbing is involved in a DIY project, people worry about what might go wrong. The truth is that installing a shower isn’t that complicated, and you can save a lot of money by doing it yourself. You shouldn’t need to make any alterations to your plumbing to complete the job, and most of the tools you need will be provided in your new shower kit.
Can I Install a Shower Myself?
Even if you’ve never installed a shower before, you’ll find this to be a project that is perfectly suited for DIYers with a moderate level of experience. Whether you're doing a bathtub conversion or installing a new stall, most of what you need comes in shower kits that you can purchase from a hardware store. The first thing you need to do is determine what type of shower stall you want.
Single-panel stalls are the easiest to install because they come preassembled. All you need to do is put them in place. Multi-panel showers require a few additional steps, but you’ve got more control over the appearance of your unit. Multi-panel units are also much easier to handle if you’re going to do the installation without any help.
Be sure to take all appropriate safety precautions, such as wearing eye protection and gloves. When you’re removing or installing a shower unit, you might kick up debris that could hurt your eyes. You’ll also need to work with equipment that will get extremely hot, so be sure to have safety gloves handy.
Tools and Materials
2- to 4-foot level Electric drill with a 1/8-inch drill bit Caulk 2-inch hole saw Cedar shims The unit itself Before You Begin: Prep the Space
It’s highly important to measure your space accurately before putting the stall in. Measuring from the floor upward and from each corner outward will ensure you’ve got the right measurements. What you’re looking for is where the plumbing apparatuses are going to come through the stall. Transfer these measurements over to the back of your unit by drawing the locations of these holes using a pencil or marker.
Pull out your old shower and make sure to scrape off all the old caulking. Be thorough because you want to work with smooth surfaces for the best installation. Once you’ve pulled out your existing shower, you need to make sure that the floor is clean and dry. The best way to clean debris is with a shop vacuum, as it’ll soak up water and dirt together.
If you’re experiencing any plumbing issues, such as low water pressure, this is a perfect opportunity to solve them. Make sure that the pipes themselves are not in need of patching and clean your showerhead. When you turn the water back on after your project, check the pipes for signs of wear or disrepair. Anything beyond minor repairs should be handled by a plumber, and this is the best time to bring in a professional.
If the floor has any moisture at all, don’t proceed until it’s completely dry. The last thing you need is for the floor to rot or invite mold and mildew into your base. Once everything is dry, apply waterproof wallboard to the walls. This can be attached with screws or nails, then sealed with caulk so that water doesn’t seep into any crevices.
:max_bytes(150000):strip_icc()/types-of-showers-4799624-hero-ddcc312cf538468492065793feb274bd.jpg)
As an enthusiastic reader about How to Install a Freestand, I figured sharing that excerpt was a good thing. Liked our write-up? Please share it. Let another person find it. We cherish reading our article about How to Install a Shower Enclosure .
Schedule Your Job Now